Help | Disclaimer | Sitemap | Search | Jobs

Door/Barrier/Parking   Loop Detector IG315/2   Loop Detector IG325/2   Circuit Board Detector   Enclosure 300 Series   TS505 Tread sensor Loops/Loop sealant   Motor ctrl. (non-revers. starter)   Motor ctrl. (reversing starter)   Motor ctrl. with converter   Remote Control   Signal Transmitter   Traffic Light Installations   Traffic Data Acquisition   Licence Plate Recognition   Tunnel Monitoring   Cross-application

Motor control (non-reversing starter) - V2N Home > Products > Door/Barrier/Parking > Motor control (non-reversing starter) Application range | Features | Functional description | Technical data PDF-Download Application range Control for the automatic operation of barriers and gates Features Self-holding opening and closing keys Direct drive of 400 V three-phase drives with reversing starter or 230 V tubular motors 24 V safety inputs for light barriers and emergency switch Integrated compressional-wave or contact-strip monitoring Integrated radio receiver (HF module optional) Outputs for idle / busy signal transmitter and floating contacts for control of lighting Detail view Functional description The motor control V2N is designed for driving 400 V three-phase reversing-starter motors with 230 V control voltage and for 230 V tubular motors. All signal inputs operate on 24 V DC and are opto- electronically isolated by an opto-coupler. An integrated 24 V DC power pack feeds light barriers and command initiators. Relay outputs are permitted for a maximum current of 4 A. The drive can be specifically switched to OPEN, CLOSE or STOP mode, using the three integrated keys, or by an external triple mode key switch. The external "OPEN/STOP/CLOSE-key switch" and the built-in radio receiver change their function after each manipulation (OPEN>STOP>CLOSE>STOP>OPEN etc.). After an OPEN or CLOSE impulse, the motor drive is fed until the appropriate end switch in the motor is reached. This is the reason for safety devices for both operating directions. The following safety devices can be connected: roll-in safety, light barrier safety and a bottom safety edge. If a safety feature fails, manual operation is possible with the integrated keys. The unit can be equipped with two signal transmitters for warning devices during opening/closing. There is a potential free relay that is activated upon every OPEN impulse for activating garage light.

Technical data Power supply 230 V, 50 Hz Power consumption max. 10 W Switching current of outputs max. 4 A Safety class IP 54 Fuse 4 A delay-action Operating temperature -10°C to +55°C Storing temperature -20°C to +70°C Dimensions (200 x 120 x 80) mm Weight 0.5 kg PDF download Download this document as PDF To view a PDF file you need Adobe Acrobat Reader which is available free of charge at Adobe's website. More downloads: Home > Downloads © 2001 WEISS-ELECTRONIC GmbH - Niederkircher Straße 16 - 54294 Trier - Germany Company | Projects | Systems | Products | Services | Download | Contact